Welcome Guest! In order to take advantage of all the great features that Waterloo Region Connected has to offer, including participating in the lively discussions below, you're going to have to register. The good news is that it'll take less than a minute and you can get started enjoying Waterloo Region's best online community right away. Click here to get started.


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
357 King St East
#1
Location: 357 King St East Kitchener
Architect: James Fryett Architect
Project: Commercial building in Kitchener's Market District

Location

http://imgur.com/R0hIHDN


Current site conditions
http://imgur.com/zTrAefh

http://imgur.com/CMqEWOm

Permit(s) information:
#15-1207284
PERMIT IS FOR THE DEMOLITION OF A 2 STOREY RESIDENTAIL AND COMMERCIAL BUILDING TO THE FOUNDATION - 3 RESIDENTIAL UNITS AND 2503 SF COMMERCIAL SPACE - SEE PERMIT # 14-126570 FOR NEW CONSTRUCTION

# 14-126570
PERMIT IS TO RE-CONSTRUCT A RETAIL AND OFFICE BUILDING ON THE EXISTING FOUNDATION - SEE PERMIT #15-1207284 FOR DEMOLITION TO FOUNDATION

Notice of tender on James Fryett Architect's website
http://www.fryettarchitect.com/tenders/n...ing-cedar/
Reply


Messages In This Thread
357 King St East - by rangersfan - 10-26-2016, 08:26 PM
RE: 357 King St East - by isUsername - 10-26-2016, 08:41 PM
RE: 357 King St East - by tomh009 - 10-26-2016, 09:14 PM
RE: 357 King St East - by Chris - 11-01-2016, 10:58 AM
RE: 357 King St East - by MidTowner - 10-26-2016, 09:17 PM
RE: 357 King St East - by Lens - 10-26-2016, 09:24 PM
RE: 357 King St East - by jordan2423 - 10-27-2016, 12:06 AM
RE: 357 King St East - by rangersfan - 10-27-2016, 04:57 AM
RE: 357 King St East - by tomh009 - 10-27-2016, 09:55 AM
RE: 357 King St East - by Spokes - 10-27-2016, 05:40 AM
RE: 357 King St East - by Section ThirtyOne - 10-27-2016, 09:10 AM
RE: 357 King St East - by panamaniac - 10-27-2016, 09:53 AM
RE: 357 King St East - by MidTowner - 10-27-2016, 10:28 AM
RE: 357 King St East - by tomh009 - 10-27-2016, 10:42 AM
RE: 357 King St East - by MidTowner - 10-27-2016, 11:03 AM
RE: 357 King St East - by tomh009 - 10-27-2016, 11:56 AM
RE: 357 King St East - by Memph - 10-30-2016, 01:28 PM
RE: 357 King St East - by tomh009 - 11-01-2016, 11:04 AM
RE: 357 King St East - by Elmira Guy - 11-01-2016, 11:23 AM
RE: 357 King St East - by rangersfan - 11-11-2016, 09:09 PM
RE: 357 King St East - by tomh009 - 11-12-2016, 09:39 PM
RE: 357 King St East - by Pheidippides - 01-15-2017, 08:06 PM
RE: 357 King St East - by Canard - 01-15-2017, 09:58 PM
RE: 357 King St East - by kitborn - 01-16-2017, 10:22 AM
RE: 357 King St East - by jamincan - 02-08-2017, 03:33 PM
RE: 357 King St East - by jgsz - 02-08-2017, 03:40 PM
RE: 357 King St East - by tomh009 - 02-08-2017, 04:13 PM
RE: 357 King St East - by GarthDanlor - 02-08-2017, 07:09 PM
RE: 357 King St East - by embe - 02-08-2017, 08:52 PM
RE: 357 King St East - by mpd618 - 02-08-2017, 09:36 PM
RE: 357 King St East - by Markster - 02-09-2017, 08:59 AM
RE: 357 King St East - by tomh009 - 02-08-2017, 07:24 PM
RE: 357 King St East - by tomh009 - 03-14-2017, 11:25 AM
RE: 357 King St East - by DHLawrence - 03-14-2017, 06:55 PM
RE: 357 King St East - by KevinL - 03-14-2017, 07:23 PM
RE: 357 King St East - by panamaniac - 03-14-2017, 10:09 PM
RE: 357 King St East - by rangersfan - 03-15-2017, 04:45 AM
RE: 357 King St East - by tomh009 - 06-15-2017, 08:53 PM
RE: 357 King St East - by KevinL - 06-15-2017, 11:05 PM
RE: 357 King St East - by neonjoe - 06-16-2017, 06:01 AM
RE: 357 King St East - by jamincan - 06-16-2017, 07:14 AM
RE: 357 King St East - by tomh009 - 06-16-2017, 08:07 AM
RE: 357 King St East - by Spokes - 06-16-2017, 09:36 AM
RE: 357 King St East - by rangersfan - 06-16-2017, 07:42 AM
RE: 357 King St East - by panamaniac - 06-16-2017, 07:57 AM
RE: 357 King St East - by tomh009 - 07-16-2017, 02:44 PM
RE: 357 King St East - by KevinL - 07-16-2017, 09:45 PM
RE: 357 King St East - by Rainrider22 - 07-17-2017, 06:23 AM
RE: 357 King St East - by jgsz - 07-17-2017, 07:02 AM
RE: 357 King St East - by tomh009 - 07-17-2017, 09:36 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)