Welcome Guest!
In order to take advantage of all the great features that Waterloo Region Connected has to offer, including participating in the lively discussions below, you're going to have to register. The good news is that it'll take less than a minute and you can get started enjoying Waterloo Region's best online community right away.
or Create an Account




Thread Rating:
  • 16 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ION - Waterloo Region's Light Rail Transit
Well done on the radio, Mark!
Reply


And with little fanfare, Charles reopened to two-way traffic today! The lights aren't activated, but it's drivable!
Reply
Here's the link to the show, but the audio isn't uploaded yet: http://www.570news.com/2016/08/24/wednes...2016-12pm/
Reply
When you say "Charles", which section? Assume you mean somewhere around the transit terminal? It's been open for a long time now past Benton.
Reply
I've been trying to find the site plan of the proposed transit plaza adjacent to the UW station... could anyone post it or link to it please? thanks!
Reply
Page 45 of this PDF is the only thing I've seen.

http://www.regionofwaterloo.ca/en/region...6-0322.pdf

Discussion in the GRT thread: http://www.waterlooregionconnected.com/s...1#pid18551
Reply
(08-24-2016, 02:09 PM)Canard Wrote: When you say "Charles", which section? Assume you mean somewhere around the transit terminal? It's been open for a long time now past Benton.

Last week's update stated today as the day Charles would reopen to two-way traffic, though I'm not sure what parts they were referring to. I know at least from Victoria - Ontario (and probably to Queen), the No Entry signs have been removed and traffic cones taken away. Beyond that it was two-way to Cedar already. I'm not sure if it's 2 way even further (considering the crossover).
Reply


Ontario to Queen may still be closed, as I understand they don't want to reopen to traffic until the slope along the large parking lot is reinforced.
Reply
Willis Way station:
   
   
Everyone move to the back of the bus and we all get home faster.
Reply
Silly question #2375447, how does one become an LRT operator? I see in Edmonton you have to be part of the regular transit operator pool and then have some specialzed in-house training. Since GRT and GrandLinq will have different workforces where will the initial drivers come from? Does Bombardier have some sort of school on how to use their equipment? Are there specialized test 'pilots' for when a new system/vehicle is being put through its paces?
Everyone move to the back of the bus and we all get home faster.
Reply
I am 90% certain there's an MTO certification you need to have in order to drive even a light rail vehicle.

Beyond that, I'm as much in the dark as you are. If it were like standard private sector employees, you'd take applications from people, check their certifications, and then interview them: preferring applicants who have similar and extensive prior experience, and excellent references. But this assumes a large pool of acceptable applicants.

I don't know if we can assume that in the public transportation sector.
Reply
You have to have a clean driver's license record (no demerit points) and that's about it. Previous large vehicle driving and customer experience is an asset but not required. Years ago I applied with the TTC to become a subway driver and it was much the same there.

Keolis is taking care of the hiring directly, it's totally separate and has nothing to do with GRT - they've already hired their Lead folks for LRV ops (and many other positions at the OMSF), but I suspect they have deferred actual fleet ops until closer to when the trains arrive. (Yes, I've been keeping an eye on that Wink )
Reply
Thanks!

Currently keolis has an hr generalist, admin assistant, team leader vehicles, and maintenance engineer listed. The types of postings will probably be an early indicator of when the trains are arriving.
Everyone move to the back of the bus and we all get home faster.
Reply


Willis Way station (currently) feels a bit weird to me. The anchor wall defines the main side of the platform you will/won't be standing on. Since this station is on the UpTown side of the tracks, it means you're waiting for the train while watching out over a giant sea of (currently) parking and backyards, rather than Willis Way.
Reply
I don't think I understand your concern - are you suggesting it should be called something else? The anchor wall is centred width-wise (isn't it?) on the platform, and has tiles on both sides.
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 8 Guest(s)

About Waterloo Region Connected

Launched in August 2014, Waterloo Region Connected is an online community that brings together all the things that make Waterloo Region great. Waterloo Region Connected provides user-driven content fueled by a lively discussion forum covering topics like urban development, transportation projects, heritage issues, businesses and other issues of interest to those in Kitchener, Waterloo, Cambridge and the four Townships - North Dumfries, Wellesley, Wilmot, and Woolwich.

              User Links