09-23-2016, 09:59 AM
Welcome Guest!
In order to take advantage of all the great features that Waterloo Region Connected has to offer, including participating in the lively discussions below, you're going to have to register. The good news is that it'll take less than a minute and you can get started enjoying Waterloo Region's best online community right away.
Login or Create an Account
In order to take advantage of all the great features that Waterloo Region Connected has to offer, including participating in the lively discussions below, you're going to have to register. The good news is that it'll take less than a minute and you can get started enjoying Waterloo Region's best online community right away.
Login or Create an Account
Thread Rating:
|
ION - Waterloo Region's Light Rail Transit
|
|
09-23-2016, 10:07 AM
Early-morning photos from Charles St and nearby:
The crew was checking the alignment at the Cameron Heights crossover, getting ready for the welders: This must be a TPSS, right? Charles just W of Borden: The missing bit of embedded track being poured in the early morning at Borden station (?) on Charles: Rebar has been delivered to Ottawa in preparation for the embedded track build:
09-23-2016, 10:11 AM
Loving the crossover, Tom! Neat to see the snap lines there too installed over too for alignment. Can't wait to check it out after work.
Some LRT construction relief on the way - The Record
Points:
...plus lots of dates for all the intersections opening up shortly!
09-23-2016, 08:19 PM
I get a 404 error on that link. Just FYI.
09-23-2016, 08:52 PM
Works for me.
09-23-2016, 08:56 PM
Odd. Tried it on two different phones and get the same error message. Obviously the problem is at my end though. Have to go on PC.
09-23-2016, 09:19 PM
09-23-2016, 09:24 PM
(For what it's worth, I was able to load it just fine from my iPhone...)
09-23-2016, 09:48 PM
Also worked fine on my Android (in Chrome).
09-23-2016, 10:14 PM
It's now working on my phone, wasn't earlier when first posted.
09-23-2016, 11:18 PM
(This post was last modified: 09-23-2016, 11:19 PM by Elmira Guy.)
Also now working on my Blackberry (I know, I know. But I'm a very loyal yokel).
09-24-2016, 09:51 AM
Crossover welding and grinding in front of Cameron Heights on Charles St this morning:
09-24-2016, 10:15 AM
I always think it must be so tricky to work on these sections which are embedded on both sides of the window in which they're working. Like virtually all the flexibility of the adjoining rail is gone, so you're really wrestling with it. When they cut off the ends of the rails sticking out, that's definitely a "Measure twice, cut once" moment!
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 100 Guest(s)

