11-21-2018, 10:50 AM
Welcome Guest!
In order to take advantage of all the great features that Waterloo Region Connected has to offer, including participating in the lively discussions below, you're going to have to register. The good news is that it'll take less than a minute and you can get started enjoying Waterloo Region's best online community right away.
Login or Create an Account
In order to take advantage of all the great features that Waterloo Region Connected has to offer, including participating in the lively discussions below, you're going to have to register. The good news is that it'll take less than a minute and you can get started enjoying Waterloo Region's best online community right away.
Login or Create an Account
Thread Rating:
Circa 1877 (née Brick Brewery) | 20 fl | Complete
|
11-21-2018, 03:28 PM
According to the developers website the pub will be run by Waterloo Brewing.
http://www.hipdevelopments.com/news/trad...h-181-king
11-21-2018, 03:59 PM
And that would be the division of Brick Brewing Company.
11-21-2018, 07:06 PM
Which would make it Waterloo Brewing of Kitchener .....
11-21-2018, 11:19 PM
Waterloo (Region) Brewing Company!
11-22-2018, 01:25 AM
Nah Kitchener +1 On this LOL
12-01-2018, 11:17 AM
Wow very cool. I'm surprised they're installing those so early
12-03-2018, 09:09 AM
12-03-2018, 10:30 AM
Hi, mastermind, can you explain 'pre-cast concrete building' vs traditional 'beam' (I'm assuming)?
12-03-2018, 10:31 AM
Ohh so it is. Looking at it on my phone it looked like it was precast added on to the structure after the fact. Thanks for clarifying.
12-03-2018, 01:22 PM
(12-03-2018, 10:30 AM)Momo26 Wrote: Hi, mastermind, can you explain 'pre-cast concrete building' vs traditional 'beam' (I'm assuming)? Traditionally concrete forms for the walls, etc. are built on site and cement is poured into them and cast on-site in place. A pre-cast building has all the walls and floors cast off-site at a facility and they are loaded onto trucks and assembled on the site, kind of like giant lego blocks. An advantage of precast is that the only limit on speed is how fast workers can hang the precast, and it isn't temperature dependent, though cement can be formulated to cure at lower temperatures. By going precast they don't have to have as much on-site labour for building forms and pouring concrete. Another use of precast concrete panels is on traditional steel framed buildings (red 'iron' columns and beams) where they are hung off the sides as the walls instead of using brick or blocks. Many floors are precast panels too.
12-19-2018, 11:39 AM
(12-03-2018, 01:22 PM)clasher Wrote:(12-03-2018, 10:30 AM)Momo26 Wrote: Hi, mastermind, can you explain 'pre-cast concrete building' vs traditional 'beam' (I'm assuming)? Sorry I was so slow to respond Momo. What clasher said! These precast walls are the structural components and are supporting the building and the floors inside the building. This is different than the precast panels at say 100 Vic or Caroline St, etc, which are just hanging on the outside as a facade and didn't get installed until later.
12-19-2018, 11:48 AM
Is one better than the other in terms of structural integrity, work that needs to be done on the building later (read: condo fee hike) or overall appearance?
12-22-2018, 02:34 PM
(12-19-2018, 11:48 AM)Momo26 Wrote: Is one better than the other in terms of structural integrity, work that needs to be done on the building later (read: condo fee hike) or overall appearance? I can't say, but there's a whole industry around maintaining older buildings and I'm sure those people would have lots of opinion on this! My gut is precast costs more in the long run because you have all the extra exterior caulking between each panel to maintain. |
« Next Oldest | Next Newest »
|
Users browsing this thread: 8 Guest(s)