06-13-2024, 01:09 PM
Construction elevator has gone up and the final pieces of the pre-cast cladding on the podium are going up. They look to be on floor 16/17:
![[Image: 4YxVp32.jpeg]](https://i.imgur.com/4YxVp32.jpeg)
![[Image: HuaMabN.jpeg]](https://i.imgur.com/HuaMabN.jpeg)
Welcome Guest!
In order to take advantage of all the great features that Waterloo Region Connected has to offer, including participating in the lively discussions below, you're going to have to register. The good news is that it'll take less than a minute and you can get started enjoying Waterloo Region's best online community right away.
Login or Create an Account
In order to take advantage of all the great features that Waterloo Region Connected has to offer, including participating in the lively discussions below, you're going to have to register. The good news is that it'll take less than a minute and you can get started enjoying Waterloo Region's best online community right away.
Login or Create an Account
Waterloo Region Connected
/
Land Development and Real Estate
/
Urban Areas
/
TEK Tower (30 Francis) | 45 fl | U/C
/
TEK Tower (30 Francis) | 45 fl | U/C
Thread Rating:
|
TEK Tower (30 Francis) | 45 fl | U/C
|
My regular update wasn't until next week, but in case U-Haul moves back in the way, here's one from today. Crane got taller, right?
![[Image: VLijX0n.jpg]](https://i.imgur.com/VLijX0n.jpg)
Yesterday, 01:17 PM
Definitely taller now. For the engineers or builders on this forum, can you please explain to me why some buildings have the crane on the outside and other buildings have it on the inside ? It is my understanding that when the crane is setup inside, the crane crawls up the building so you don't need as many tower sections.
2 hours ago
My first guess would be for the boom reach to compensate for the fact that podium is so large and they're also pulling up supplies from all sides of the project due to the limited amount of space they are needing to work with. It's probably just easier.
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread: KingandWeber, 1 Guest(s)