Posts: 4,340
Threads: 1
Joined: May 2015
Reputation:
180
(10-26-2017, 02:13 PM)Canard Wrote:
Thanks for the great pictures! And the interesting video. However, I think MAX needs to re-think their approach. Rather than investigating how a video which is of public interest and which has absolutely no confidential content came to be available, they should be officially releasing it, committing to releasing any future video of comparable interest, and investigating how it is that a train overran the platform, something which is actually dangerous.
Posts: 6,905
Threads: 32
Joined: Oct 2014
Reputation:
224
Yeah, that's not going to happen. Nobody fesses up to screwing up - especially when it's a public agency. Why would they?
Posts: 4,340
Threads: 1
Joined: May 2015
Reputation:
180
(10-26-2017, 05:16 PM)Canard Wrote: Yeah, that's not going to happen. Nobody fesses up to screwing up - especially when it's a public agency. Why would they?
Because this is a democracy?
But seriously folks, …
Point taken. However, I expect an investigation into the overrun incident will be required. So they can’t really avoid that part. What they can do is avoid attempting to hide information from the public; and viewing it strictly from an appearance/PR perspective, they can especially avoid appearing to hide information that is already out there and therefore can no longer be hidden. I liked how the news reports said something like “we asked them for this footage [that we are broadcasting right at this second] and they wouldn’t give it to us.” To me it made MAX look like a bunch of idiots in a way that a single zero-fatalities buffer overrun incident (or even a more serious incident) doesn’t necessarily.
Posts: 210
Threads: 0
Joined: May 2016
Reputation:
4
10-11 second mark of the video, what's that popping out? Headlight? lol
As far as releasing the video, quite possible there was some litigation or something else going on in the background.
Posts: 6,905
Threads: 32
Joined: Oct 2014
Reputation:
224
The thing that pops out is the combed interface block on the top of the bumping post, after it reaches the end of its travel and structurally fails by separating from the frame:
Posts: 673
Threads: 2
Joined: Oct 2014
Reputation:
25
They really need a way to get rid of that water and waste on those tracks that are not embedded.
Posts: 616
Threads: 4
Joined: Jul 2016
Reputation:
22
(10-27-2017, 02:12 AM)Square Wrote: They really need a way to get rid of that water and waste on those tracks that are not embedded.
Having a simple bioswale would've done the job perfectly well. Uh.
Posts: 1,709
Threads: 2
Joined: Aug 2014
Reputation:
34
Anyone know what the odd "washing" is that's happened on parts of the tracks? The rails in front of Kaufman were "washed" with some white gunk, but seemingly only on the sidewalk side. People's shoes tracked it around, and it seems a bit caked on, but it doesn't seem like it's everywhere.
Posts: 6,905
Threads: 32
Joined: Oct 2014
Reputation:
224
They're removing the temporary spacing from all the concrete sections, filling it with the final "stuff", and then painting the final road markings over top.
What is "bioswale"?
I worry that the water in the grooves where the bumping posts will fill with water, freeze, and then render the bumping post immobile. In a crash, it won't do its job properly, because it won't be able to move.
Posts: 6,491
Threads: 38
Joined: Aug 2014
Reputation:
88
A bioswale is a very posh ditch, if I'm not mistaken.
Posts: 6,905
Threads: 32
Joined: Oct 2014
Reputation:
224
Seems like a drain tube might be a better and more practical way to go.
Posts: 10,286
Threads: 65
Joined: Sep 2014
Reputation:
298
(10-27-2017, 10:56 AM)Canard Wrote: They're removing the temporary spacing from all the concrete sections, filling it with the final "stuff", and then painting the final road markings over top.
Temporary spacing? Is this the white plastic spacers?
Posts: 1,191
Threads: 0
Joined: Mar 2015
Reputation:
34
(10-27-2017, 10:56 AM)Canard Wrote: I worry that the water in the grooves where the bumping posts will fill with water, freeze, and then render the bumping post immobile. In a crash, it won't do its job properly, because it won't be able to move.
Is the amount of ice that could build up in that area really strong enough to stop a train dead in its tracks?
Posts: 6,905
Threads: 32
Joined: Oct 2014
Reputation:
224
(10-27-2017, 11:46 AM)tomh009 Wrote: (10-27-2017, 10:56 AM)Canard Wrote: They're removing the temporary spacing from all the concrete sections, filling it with the final "stuff", and then painting the final road markings over top.
Temporary spacing? Is this the white plastic spacers?
Yes
(10-27-2017, 11:49 AM)timc Wrote: (10-27-2017, 10:56 AM)Canard Wrote: I worry that the water in the grooves where the bumping posts will fill with water, freeze, and then render the bumping post immobile. In a crash, it won't do its job properly, because it won't be able to move.
Is the amount of ice that could build up in that area really strong enough to stop a train dead in its tracks?
Yes
Posts: 6,905
Threads: 32
Joined: Oct 2014
Reputation:
224
<blockquote class="twitter-tweet" data-lang="en"><p lang="en" dir="ltr">Check this out for a good laugh. <a href="https://twitter.com/hashtag/wrLRT?src=hash&ref_src=twsrc%5Etfw">#wrLRT</a> <a href="https://t.co/g2Te2dfqGS">pic.twitter.com/g2Te2dfqGS</a></p>— Iain Hendry ? (@Canardiain) <a href="https://twitter.com/Canardiain/status/923582545073262592?ref_src=twsrc%5Etfw">October 26, 2017</a></blockquote>
|